cisco 2504 wireless controller 基本設定（一）

控制器為 cisco 2504 wireless controller
建議把韌體版本更新到 Software Version 8.1.102.0 不然會搞死自己、不然會搞死自己、不然會搞死自己，因為很重要所以要說三次，尤其是在跟Cisco AP1702I 搭配時...
ip：192.168.0.222 / 255.255.255.0
GW ：192.168.0.1
DNS : 192.168.0.2
兩個SSID :  Contoso 及 Contoso-1
WPA+WPA2密碼驗證


AP總共有2顆
AP Name : Contoso-AP1 及 Contoso-AP2
Contoso-AP1 IP: 192.168.0.219
Contoso-AP2 IP: 192.168.0.223

首先要對Controller做基本設定如下
 Would you like to terminate autoinstall? [yes]: yes
System Name [Cisco_be:72:24] (31 characters max): WLC2504
Enter Administrative User Name (24 characters max): cisco
Enter Administrative Password (3 to 24 characters): ********
Re-enter Administrative Password                 : ********

Enable Link Aggregation (LAG) [yes][NO]: yes
Management Interface IP Address: 192.168.0.222
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 192.168.0.1

Cleaning up Provisioning SSID

Error: failed to disable Day0 ssid. return Code : 7

Management Interface VLAN Identifier (0 = untagged): 0
Management Interface DHCP Server IP Address: 192.168.0.2

Virtual Gateway IP Address: 1.1.1.1

Multicast IP Address: 239.0.1.1

Mobility/RF Group Name: ContosoGroup

Network Name (SSID): Contoso

Configure DHCP Bridging Mode [yes][NO]: no

Allow Static IP Addresses [YES][no]: yes

Configure a RADIUS Server now? [YES][no]: no
Warning! The default WLAN security policy requires a RADIUS server.
Please see documentation for more details.

Enter Country Code list (enter 'help' for a list of countries) [US]: TW

Enable 802.11b Network [YES][no]: yes
Enable 802.11a Network [YES][no]: yes
Enable 802.11g Network [YES][no]: yes
Enable Auto-RF [YES][no]: yes
Enter the date in MM/DD/YY format: 10/08/15
Enter the time in HH:MM:SS format: 09:05:35
Would you like to configure IPv6 parameters[YES][no]: no

Configuration correct? If yes, system will save it and reset. [yes][NO]: yes
Cleaning up Provisioning SSID

Configuration saved!
Resetting system with new configuration...

Configuration saved!
Resetting system with new configuration...
重新開機過程略
Starting mDNS Services: ok
Starting Management Services:
   Web Server:    CLI:    Secure Web: ok

(Cisco Controller)

Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)

User:




重新開機完成，接續第二篇